Introduction:

* Used for profiles such as aluminum profile and curtain wall, two heads cutting angle

90°45° 67.5° (22.5°) are available.

* Cutting dimension controlled by screw, with high accurate driving and locating. Right

head can achieve the setting location automatically. Right head feed the profiles

automatically; can also use for cutting aluminum connectors.

* Japan CNC system adopted, which include PLC, touched screen, servomotor, and

servodriver, photoelectrical switch, and photoelectrical cells etc. Complete Japan

CNC system results highaccuracy and smooth working.

* Uniform speed feeding and smooth motion due to air-draulic damping cylinder.

* Saw blade feeding system adopts imported linear guide kinematic pair results high

accuracy.

* Automatic protecting guards result convenience and safety.

Technical Parameter:

Model                                                LJZ2-CNC-500×5000   

Input voltage                                   380V/50Hz

Input power                                     6.0Kw

Air pressure                                    0.5~0.8MPa

Air consumption                             200L/min

Motor rotation speed                     2800r/min

Cutting length                                 400~5000mm

Cutting width                                   10~130mm

Cutting height                                  10~300mm

Cutting angle                                   90° 45° 67.5°

Saw feeding speed                        0~3m/min

Saw blade standard                       φ500×4.4×φ30×Z120

Overall dimension                          6300×1700×1600mm